Metal Film Fixed Resistor 1/8W 1/6W 1/4W 1/2W 1W 2W 3W Color Ring Resistor
Features:
- Small volume, low noise
- Good stability and high frequency performance
- High heat conduction porcelain core
- High stability metal skin film
- High reliability end cap with good pressing
- Epoxy paint with high insulation and solvent resistance
Application:
Because it is a lead type resistance, simple and light structure, convenient manual installation and maintenance, often used in a variety of household appliances, communications, instrumentation and radio resistance equipment.
Main Parameters
Resistance type: metal film resistor
Rated power : 1/8w,1/4W,1/2w,1W,2W,3wPrecision resistance :±1%
Temperature coefficient: ±100ppm/°c
Production process: porcelain tube plating on alayer of alloy material
Resistance shape: cylindrical
Number of color rings :5 color rings
Operating Temperature: -55℃~+155℃
Part Number:
| TMRM | - | 1 2 3 4 | 5 | 6 7 | 8 | 9 10 |
| Produce Code TMRM: Precision Metal Film Resistor | | Resistance Value Code: Three digits: The first two digits are significant figures and the third one denotes number of zeros. 394=390KΩ Four digits: The first three digits are Significant figures and the fourth one denotes number of zeros.1201=1.2K Ω | Tolerance F=±1% G= ±2% J=± 5% | Rated Power: One digits: 1= 1W 2= 1/2W 3= 3/4W 4= 1/4W 8= 1/8W L= 1/10W M=1/16W N=1/20W O=1/32W Two digits: XS=2WS YS=3WS... | Packaging T:tape&reel B:bulk | Terminal: empty value: general type F:Vertical form M:Horizontal form |
| - |
| |
Electrical Characteristics:
| Type | Rated Power | Max Working Voltage | Max Overload voltage | Dielectric withstanding voltage | Resistance Range | Operation
Temperature | T.C.R. PPM/℃ | | 8(1/8W) | 0.125W | 150V | 300V | 300V | 1Ω~10MΩ | -55℃~+155
℃ | R≤10: 200
R>10: 100 | | 4/1/4W) | 0.25W | 200V | 500V | 350V | 1Ω~10MΩ | | 2(1/2W) | 0.5W | 300V | 700V | 400V | 1Ω~10MΩ | | 1(1W) | 1W | 350V | 800V | 450V | 1Ω~10MΩ | | X(2W) | 2W | 500V | 800V | 450V | 1Ω~10MΩ | | Y(3W) | 3W | 500V | 800V | 500V | 1Ω~10MΩ | | Z(5W) | 5W | 500V | 1000V | 500V | 1Ω~10MΩ | | 4S(1/4WS) small size | 0.25W | 150V | 300V | 300V | 1Ω~10MΩ | | 2S(1/2WS) small size | 0.5W | 250V | 700V | 350V | 1Ω~10MΩ | | 1S(1WS) small size | 1W | 350V | 800V | 400V | 1Ω~10MΩ | | XS(2WS) small size | 2W | 500V | 800V | 450V | 1Ω~10MΩ | | YS(3WS) small size | 3W | 500V | 1000V | 450V | 1Ω~10MΩ | | ZS(5WS) small size | 5W | 500V | 1000V | 500V | 1Ω~10MΩ | |
Parameter Performance
| Item | Performance |
| Operating Temp. Range | -55℃ ~ +155℃ |
| Temperature Coefficient | 10Ω:±100PPM/℃
<10Ω:±200PPM/℃ |
| Short Time Overload | Within ±(0.5%+0.05Ω), no evidence of mechanical damage. |
| Insulation Resistance | 104MΩ or more |
| Dielectric Withstanding Voltage | No evidence of flashover mechanical damage, arcing or insulation breakdown. |
| Pulse Overload | Within ±(0.5%+0.05Ω) |
| Terminal Strength | No evidence of mechanical damage. |
| Resistance to Soldering Heat | Within ±(0.5%+0.05Ω), no evidence of mechanical damage. |
| Solderability | Covered with new solder by 95% at least. |
| Resistance to Solvent | No deterioration of protective coating and markings. |
| Temperature Cycle | Within ±(1%+0.05Ω), no evidence of mechanical damage. |
| Load Life in Humidity | Within ±(1%+0.05Ω) |
| Load Life | Within ±(2%+0.05Ω) |
Dimension(mm):
| Power | Dimension(mm) |
| L±1 | D±0.5 | d±0.05 | P±1 | W1±1 | W2±1 |
| 1/8W(1/4WS) | 3.50 | 1.70 | 0.40 | 5.00 | 52.00 | 64.00 |
| 1/4W(1/2WS) | 6.00 | 2.30 | 0.40 | 5.00 | 52.00 | 64.00 |
| 1/2W(1WS) | 9.00 | 3.20 | 0.48 | 5.00 | 52.00 | 64.00 |
| 1W(2WS) | 11.00 | 4.50 | 0.68 | 5.00 | 63.00 | 75.00 |
| 2W(3WS) | 15.00 | 5.00 | 0.68 | 5.00 | 68.00 | 80.00 |
| 3W(5WS) | 17.00 | 6.00 | 0.68 | 10.00 | 71.00 | 83.00 |
| Power | Dimension(mm) |
| L±1 | D±0.5 | d±0.05 | H±2 |
| 1/8W(1/4WS) | 3.50 | 1.70 | 0.40 | 27.00 |
| 1/4W(1/2WS) | 6.00 | 2.30 | 0.40 | 26.00 |
| 1/2W(1WS) | 9.00 | 3.20 | 0.48 | 24.00 |
| 1W(2WS) | 11.00 | 4.50 | 0.68 | 29.00 |
| 2W(3WS) | 15.00 | 5.00 | 0.68 | 30.00 |
| 3W(5WS) | 17.00 | 6.00 | 0.68 | 30.00 |
Construction:
| No. | Components |
| A | Ceramic core |
| B | Metal Film |
| C | Caps |
| D | Epoxy resin painting |
| E | Color code |
| F | Soldered or tinned annealed wire. |
FAQ Of Topmay Capacitor
1) Can I have a free sample to test ?
Yes, we could provide free samples to test and check quality. Freight cost is collected.
2) What is the lead time?
Sample needs about 7~10 working days prepared; mass production average time takes 15-20 working days
3) Do you have any MOQ limit?
Yes. But it depends on product. Normally MOQ is 2K~10Kpcs
4) How about price terms?
We do FOBSHENZHEN if order amount is more than 5000USD. Less than that, it is EXWSHENZHEN and we do not undertake local charge.
5) What information should I let you know if I want to get a quotation?
Basically for capacitor, it requires to know detailed capacitance and voltage. If you have more information, such as type, product photo for reference, you could kindly provide too.
Our series of strong products of capacitors can be divided into below types:
★ Ceramic Disc Capacitor( low and high voltage, Y1/Y2 safety )
★ Multilayer Ceramic Capacitor( radial, axial and SMD )
★ Film Capacitor( Mylar, MKT, MKP, X2, CBB60, CBB61, CBB65, CL21-Box, CBB-BOX, CL20, CBB20, CBB81, etc. )
★ Aluminum Electrolytic Capacitor(SMD, Radial , Axial, Snap-in , Screw Terminal, etc. )
★ Tantalum Capacitor(SMD, Radial , Axial )
★ Super Capacitor( Coin Type, Cylindrical Type, Module Type)
★ Mica Capacitor
★ Trimmer Capacitor
And series of resistors which we develop new production lines are as below:
★ SMD Resistors
★DIP TYPE Resistors( KNP, CF, MF, MOF, ect,)
★ Cement Resistors
★ Leadless Resistors( MLEF)
★Power Resistor
Product Tags:
|
|
Fixed Metal Film Resistor Color Ring Coating 1/4W 1/2W 3W Images
|
